10
EG-SMS PROGRAMMABLE POWER OUTLET STRIP
WITH GSM INTERFACE
All brands and logos are registered trademarks of their respective owners
3. Installation
It is strongly recommended to avoid damp or wet places for
installation.
EG-SMS should be connected to the European AC wall socket
of the standard DIN 49 440.
3.1. Getting started
Connect EG-SMS to the wall socket first and connect the GSM
antenna
EG-SMS can now be switched on and off by means of the
Main
rocker switch
.
Two (the first and the last) sockets of EG-SMS are marked with
the symbol
. These two sockets are switched on and off by
means of the
Main rocker switch
and cannot be managed by the
computer – so they are called
non-manageable sockets
in this manual.
If EG-SMS is switched on then the red indicator
POWER
is lit.
In this case both non-manageable sockets are now
live
and connected to
the power supply.
The sockets: Socket 1, Socket 2, Socket 3 and Socket 4 can be
managed or pre-programmed via GSM. They are called
manageable
sockets
in this manual.