150W 1/3 SHEET SANDER ENB458SDR
PLUG REPLACEMENT
(UK & IRELAND ONLY)
If you need to replace the fitted plug then follow the instructions below.
IMPORTANT
The wires in the mains lead are colored in accordance with the following code:
BLUE =NEUTRAL
Brown = Live
As the colors of the wires in the mains lead of this appliance may not correspond with the colored markings
identifying the terminals in your plug, proceed as follows. The wire which is colored blue must be connected to
the terminal which is marked with N. The wire which is colored brown must be connected to the terminal which
is marked with L.
Warning:
Never connect live or neutral wires to the earth terminal of the plug.
Only fit an approved 5AMP
BS1363/A
plug and the correct rated fuse.
Note:
If a moulded plug is fitted and has to be removed take great care in disposing of the plug and severed
cable, it must be destroyed to prevent engaging into a socket.
5 Amp fuse approved
To BS1362
