850W ROTARY HAMMER ENB465DRH
Torque limiter
There is a clutch in your hammer drill. The torque limiter will actuate when a certain torque level is reached.
The motor will disengage from the output shaft. When this happens, the bit will stop turning. As soon as the
torque limiter actuates, release the trigger and remove the tool and bit immediately. This will help prevent
premature wear of the tool.
Double insulation
The tool is double insulated. This means that all the external metal parts are electrically insulated from the
mains power supply. This is done by placing insulation barriers between the electrical and mechanical
components making it unnecessary for the tool to be earthed
.
Important note
Be sure the supply is the same as the voltage given on the rating plate. The tool is fitted with a two-core cable
and plug.
Remove the mains plug from socket before carrying out, any adjustment or servicing.
Intended use
The machine is intended for hammer /hammer drilling in brick,concrete and stone as well as for drilling in
wood,metal and plastic.
