WARNING!
Identify safety measures to protect the operator that are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched
off and when it is running idle in addition to the trigger time).
Vibration and noise reduction
To reduce the impact of noise and vibration emission, limit the time of operation, use low-vibration and
low-noise operating modes as well as wear personal protective equipment.
Take the following points into account to minimize the vibration and noise exposure risks:
1. Only use the product as intended by its design and these instructions.
2. Ensure that the product is in good condition and well maintained.
3. Use correct application tools for the product and ensure they in good condition.
4. Keep tight grip on the handles/grip surface.
5. Maintain this product in accordance with these instructions and keep it well lubricated (where
appropriate).
6. Plan your work schedule to spread any high vibration tool use across a number of days.
Emergency
Familiarise yourself with the use of this product by means of this instruction manual. Memorise the safety
directions and follow them to the letter. This will help to prevent risks and hazards.
1. Always be alert when using this product, so that you can recognise and handle risks early. Fast
intervention can prevent serious injury and damage to property.
2. Switch off and disconnect the machine from the power supply if there is any malfunction. Have the
product checked by a qualified specialist and repaired, if necessary, before you put it into operation
again.
Residual risks
Even if you are operating this product in accordance with all the safety requirements, potential risks of
injury and damage remain. The following dangers can arise in connection with the structure and
design of this product:
1.
Health defects resulting from vibration emission if the product is being used over long periods of time or
not adequately managed and properly maintained.
2.
Injuries and damage to property due to broken application tools or the sudden impact of hidden objects
during use.
3.
Danger of injury and property damage caused by flying objects.
WARNING!
This product produces an electromagnetic field during operation! This field may under some
circumstances interfere with active or passive medical implants! To reduce the risk of serious or fatal
injury, we recommend persons with medical implants to consult their doctor and the medical implant
manufacturer before operating this product!
Health Surveillance
All employees should be part of an employer’s health surveillance scheme to help identity any vibration related
diseases at an early stage, prevent disease progression and help employees stay in work.
750W ROTARY HAMMER ENB569DRL
