380W RANDOM ORBIT SANDER ENB624SDR
Operating instructions
1. Fitting and remove sanding paper (Fig.1)
The sander is equipped with a self-adhesive base to allow
easy and quick replacement of sanding papers.
1. Check that the sanding base is clean and free from dust
or other debris.
2. As the sanding base is made of dust extraction
ports.Please always make sure the sheet corresponds with
perforation in sanding foot.
3. The self-adhesive sheet can be stuck on sanding surface
directly. And can be peeled away from the base simply.
Caution:
Always use the tool with the total sanding surface
covered with sanding paper.
Change the sanding sheet regularly. Do not continue to
use worn, torn or heavily clogged sanding sheets.
2. Fitting the dust bag (Fig.2)
The dust will be collected by the dust suction function during
use.
To assemble the dust bag, just
push dust bag to the dust
collection port which is in rear of the tool tightly.
2. Adjust the auxiliary handle (Fig.3)
The machine equipped with an auxiliary handle and can be
adjusted position to suit different operation habit.
To adjust the position of auxiliary handle,
1. Release the lock knob in anti-clockwise direction which
is on the auxiliary handle.
2. Put down the auxiliary handle until your desired
position.
3. Tight the lock knob in clockwise direction to lock the
auxiliary handle.
Warning!
Always operation with both main handle and
auxiliary handle!
Fig.1
Fig.2
Fig.3