background image

Introduction

Thank you very much for choosing a photovoltaic module 

from Energetica Industries GmbH. With e.Classic M HC and 

e.Classic M HC black - these are just two high-performance 
modules from our constantly growing product range - you 
can convert the sun's energy directly into environmentally 

friendly photovoltaic electricity. 

We have drawn up these installation instructions very 
carefully so that you can fully exploit the capabilities of your 
PV modules, and above all to protect you from potential 
dangers. 

Therefore, please read the following manual carefully and 

observe the notes. Failure to do so can not only mean less 
yield - it can also lead to personal injury and property damage. 

These installation instructions describe the safe installation 

of the photovoltaic modules e.Classic M HC / e.Classic M HC 

black from Energetica Industries GmbH, hereinafter referred 
to as the PV module.

»

  Read this manual carefully before starting the installation 

   All installation instructions must be understood before 
      beginning installation and implemented accordingly. 

»

  Before installing the PV modules, find out more about 

    guidelines and approval requirements from the respons- 
      ible local authorities and energy providers.

»

  The installation and maintenance of PV modules may only 

      be carried out by authorized and qualified personnel. 

»

  Keep this installation manual for the entire service life of 

     the PV modules and ensure that this manual is accessible 
      to the operator of the PV system at all times. 

»

  Make sure that the operating instructions are passed on 

      to subsequent owners or users of the PV modules and 
      that every supplement issued by the manufacturer is 
      included. 

»

  Please also note other applicable documents.

Page 1

e

Summary of Contents for e.CLASSIC M HC

















Reviews: