5
-
The home exerciser should not be used or stored in a moist area because of possible corrosion.
-
Check at least every 4 weeks that all connecting elements are tightly fitted and in good condition.
-
In case of repair please ask your dealer for advice.
-
Replace defective components immediately and/or keep the equipment out of use until repair.
-
Only use original spare parts for repair.
-
Use a damp cloth to clean the Home Exerciser and avoid the use of aggressive detergents when
cleaning the Home Exerciser.
-
After exercising, immediately wipe of the sweat; perspiration can ruin the appearance and proper
function of the Home Exerciser.
-
The following tools are required for assembly: Two adjustable wrenches and Allen Wrenches.
-
Always only use
Carriage Bolt
to insert through the
SQUARE
hole
on component that needs to be
assembled. Attach washer only to end of the
Carriage Bolt
.
-
Always only use
Allen Bolts or Hex Bolts
insert through the
ROUND hole
on component that need to
be assembled.
-
Always wait until all bolts are installed to the component and then fasten the bolts. Do not fasten each
bolt right after it is installed.
-
ASSEMBLED DIMENSION: L 52 x W 46 x H 58 cm
Symbols shown in Assembled Instruction:
Fasten Nuts and Bolts.
After all components and hardware have been assembled in current and
previous steps. Securely tighten all Nuts and Bolts.
NOTE: Do not over tighten any component with pivotal function. Make
sure all pivotal components are able to move freely.
Do not tighten all Nuts and Bolts in this step yet.
When Fasten Nuts and Bolts symbol appeared in next step, then make sure to
fasten all Bolts that have been installed.
Care and Maintenance
Assembly notes
