WARNING!
Check that the supply voltage and frequency correspond to those specified on the
appliance data plate.The appliance should only be connected to a main power supply via a security breaker
(Max.30mA) to cut off the electricity supply in the instance of a short circuit.
5.2 STOPPING THE WASHER
WARNING!
ALWAYS turn off the unit’s motor BEFORE turning off the unit’s water supply.
Serious damage could occur to the motor if the unit is run without water.
a) Release the trigger, the motor will stop operation.
b) Set the switch at the position OFF.(Fig.3)
c) Disconnect the plug from the socket.
WARNING!
Failure to follow the above instructions may cause damage to the machine.
5.3 CHANGING ACCESSORIES
a) Release the trigger.
b) Turn off the power switch (the position» OFF).(Fig.3)
c) Disassemble the accessory and assemble the other one (see chapter “ASSEMBLY INSTRUCTIONS”).
WARNING!
Never disconnect the high -pressure discharge hose from the machine while the system
is still pressurized.To depressurize the unit, turn off the motor, turn off the water supply and squeeze the
trigger 2-3 time.
17
Summary of Contents for EZN1200
Page 2: ......
Page 3: ...Let s get started You re excited to power up so we ll keep this brief...
Page 28: ......
