7. CLEAN-UP AND STORAGE
7.1 SHUTTING DOWN THE PRESSURE CLEANER
When finished using the pressure cleaner, follow these steps to shut down the unit:
• Turn the pressure cleaner to the OFF position, unplug the power cord from the wall outlet.
• Turn off the water supply.
• Before disconnecting high-pressure hose connection, point the gun in a safe direction and discharge the
high-pressure water.
• Disconnect high-pressure hose from the pressure cleaner and gun.
• Disconnect garden hose from the pressure cleaner.
• Remove quick coupler fitting from garden hose and attach to the nipple portion of the fitting installed on
the pressure cleaner for storage.
• Remove excess water from the pump by tipping the unit on both sides to drain any remaining water from
inlet and outlet fittings.
• Remove Water Intake Filter and flush with water to remove dirt or debris. Return filter once cleaned.
• Drain detergent reservoir and flush with running water.
• Wipe away any remaining water on all parts and fittings.
• Engage the gun safety lock.
• Store the pressure cleaner, parts, and accessories in an area with a temperature above 0°C(32°F).
7.2 WINTERIZING AND LONG-TERM STORAGE
Follow all of the above shut-down procedures, adding the following steps.
• After disconnecting the water supply, and before disconnecting the high-pressure hose, turn the pressure
cleaner on for 2-3 seconds, until any remaining water in the pump exits.
Turn unit off immediately.
WARNING!
Continued use of the pressure cleaner without water supply attached will cause severe damage to
the unit!
• Always store the pressure cleaner, parts, and accessories in an area with a temperature above 0°C
(32°F).
WARNING!
Failure to comply with these storage instructions will result in damage to the pump assembly.
7.3 MAINTENANCE
• This pressure cleaner is supplied with a closed lubrication system, so no addition of oil is needed.
• Check all hoses and accessories for damage prior to use.
• Check the inlet filter periodically for deposits. Clean this filter regularly for maximum performance
20
Summary of Contents for EZN1200
Page 2: ......
Page 3: ...Let s get started You re excited to power up so we ll keep this brief...
Page 28: ......
