6/9
energysistem.com
Charging port
9.
LED indicator
10.
Main Functions
Switching on and off the device
To switch on or off the Clock Speaker 3 Light, slide the On/Off (1) switch up or down. The white LED mode is the mode
by default. At this point, the time appears on the Display (7).
Light modes
Your Clock Speaker 3 Light features multicoloured RGB lights. The Touch Control function allows you to control them
using the Touch panel (6). This way, you can decorate your bedside table.
Tap the Touch panel (6) to turn on or off the lights.
Press and hold the Touch panel (6) for 3 seconds when the lights are on to choose from 3 light modes: white, colour or
rainbow.
Once the white light mode is enabled, tap the Touch panel (6) to choose the light shade that suits your environment
best. You can choose from different shades of blue to yellow.
If colour mode is enabled, tap the Touch panel (6) to choose the colour you prefer for your bedside table.
If you enable rainbow mode, tap the Touch panel (6) once to pause colour transition. Tap again to continue.
Playback modes
Once the Clock Speaker 3 Light is on, you can choose the playback mode you prefer. To do so, press Playback mode (2)
until finding the preferred playback mode. You will see the following modes appear on the Display (7):
Clock --> Bluetooth --> FM radio --> AUX
Clock and alarms
Clock
Enable clock mode and press and hold Playback mode (2) for 2 seconds. You will see the hour digits flashing on the
Display (7). Press Back/Volume - (3) or Next/ (4) to select the preferred hour. Press Playback mode (2) to
confirm. Repeat the steps above to select the minutes.
Alarms
Your Clock Speaker 3 Light allows you to set 2 alarms separately.
Enable clock mode and press Play/Pause (5) repeatedly. You will see the following options appear on the Display (7):
Summary of Contents for Clock Speaker 3 Light
Page 2: ...2 9 energysistem com ...
