ENERGY SISTEM Clock Speaker 3 Light, User Manual

7/9

energysistem.com

Clock --> Alarm 1 --> Alarm 2

When selecting the first or second alarm, you will see the clock icon with the corresponding number flashing on the
Display (7).

Choose the alarm you want to set. Press and hold Play/Pause (5) for 2 seconds. You will see the mode changing from
Alarm off to time mode (hh:mm) on the Display (7). At this point, you can set/activate the alarm.

To set and activate an alarm, enter time mode (hh:mm). Press Playback mode (2) for 2 seconds. You will see the hours
flashing on the Display (7). Press Back/Volume - (3) or Next/ (4) to select the preferred hour. Press Playback
mode (2) to confirm. Repeat the steps above to select the minutes. To select the type of alarm you prefer, "Beep" or
"Radio", press Back/Volume - (3) or Next/ (4) and press Playback mode (2) to confirm. Press repeatedly
Play/Pause (5) to return to Clock mode.

You will know the alarm is set when the clock icon with its corresponding number is displayed permanently on the
Display (7).

The light intensity increases gradually before the alarm sounds. Tap the Touch panel (6) to repeat the alarm every 10
minutes or press and hold to stop it and deactivate the repeat mode.

Note: If you select the radio as alarm sound, you will wake up to the last listened radio station.

Playback control

Select the playback mode, and you will be able to control all playback functions from your Clock Speaker 3 Light.

Press Back/Volume - (3) or Next/ (4) to adjust the volume level according to your preferences.

Press and hold Back/Volume - (3) or Next/ (4) for 2 seconds to skip to the previous or next track.

Press Play/Pause (5) to play or pause a song.

Note: Bear in mind that you can only control playback from the connected music player while using AUX mode (audio-
in).

Call control

Press Play/Pause (5) to answer an incoming call or press and hold the very same button to reject it.

Bluetooth (BT)

To pair your speaker with a Bluetooth device, press Playback mode (2) until Bluetooth mode is enabled. You will see
both the Bluetooth icon and the LED indicator (10) flashing blue. A sound will confirm the device has entered search
mode.

At this point, access the Bluetooth settings on your device and search for the Clock Speaker 3 Light among the detected
devices. Select it to establish the connection. You will hear a sound confirming both devices are correctly paired.

Your Clock Speaker 3 Light will automatically pair with your source device when you turn the speaker on again, provided
that Bluetooth is enabled on the source device.

Press and hold Playback mode (2) for 2 seconds to disconnect the current device and pair the speaker with a new one.

True Wireless Stereo

This technology allows you to wirelessly connect another True Wireless Stereo device within a maximum distance range
of 10 metres to increase power and create a stereo system with separate left and right channels.

Switch on both devices and enable Bluetooth mode. Press and hold Play/Pause (5) on one of the devices for at least 2
seconds. Once the connection is established, you will hear a confirmation sound. From that moment on, both devices
will play the same content simultaneously.

To disable the TWS connection, press and hold Play/Pause (5) again for a few seconds until the connection ends.

FM radio

Select FM radio and press Playback mode (2) until a radio frequency appears on the Display (7).