ENERGY SISTEM Eco True Wireless Beech Wood, User Manual

6/8

energysistem.com

they pair automatically. When the Indicator (3) on one earbud flashes quickly, you can pair your earphones with a
Bluetooth music player.

To switch off your Earphones Eco True Wireless Beech Wood, put them back in the charging case or tap and hold the
Right and Left touch buttons (1 and 2) for 4 seconds.

The earbuds will charge automatically when you put them back in the charging case.

Bluetooth pairing

Remove both earbuds from the charging case. Select Earphones Eco True Wireless Beech Wood from the list of
Bluetooth devices on your smartphone or Bluetooth music player. Both devices will be connected immediately and
without codes. You will hear a confirmation sound when both devices are paired. At this point, the Indicator (3) on both
earbuds turns white and blinks slowly.

If you previously paired the earbuds with a device, there is no need to repeat the pairing process again. Just enable
Bluetooth on your music player and switch on your Earphones Eco True Wireless Beech Wood. They will sync with it
automatically.

Note: To optimise battery life, your Earphones Eco True Wireless Beech Wood turn off automatically after 5 minutes in
search mode, if not synchronised with any other device.

Playback control

Play/Pause

Double tap the Right touch button (1) or Left touch button (2) to pause music or resume playback.

/Volume -

Tap the Right touch button (1) to turn up the volume or the Left touch button (2) to turn it down.

Skipping to the next or previous track

Tap and hold the Right touch button (1) for 2 seconds to skip to the next track or the Left touch button (2) to switch to
the previous song during music playback.

Answering/Ending a call

To answer an incoming call or hang up, tap the Right or Left touch button (1) or (2) once.

Rejecting an incoming call

To reject an incoming call, tap and hold the Right or Left touch button (1) or (2) for 2 seconds.

Using the Voice Assistant feature

You can interact with your smartphone voice assistant using your Earphones Eco True Wireless Beech Wood. To do so,
tap the Left touch button (2) three times in a row. You can give the voice command after hearing the confirmation
sound.

Charging the battery

Earphones

When the battery level of your Earphones Eco True Wireless Beech Wood is below 5%, you will hear a low battery
warning sound. To charge the battery, put the earbuds in the charging case. The Charging case indicator (5) flashes
white while charging the earphones. It will turn off once the charging process is complete.

Charging case

When the charging case battery level is below 10%, the Charging case indicator (5) flashes red. There are 2 ways of
charging the battery:

Using a cable

Plug the USB Type-C end of the provided cable into the Charging port (4). Connect the other cable end to a 5 V / 1 A or