47
EN
G
LI
S
H
7.7.2. ReCORDeR seTTINg
The menu provides options to configure record and timeshift options. Remember that an exter-
nal device must be connected. If "One button recording" is enabled,HD5 starts recordring when
you press the REC button on the remote control, and the recording period is the time selected
in "Default recording period"; if "One button recording is disabled",HD5 will ask you about the
recording period. See "8.PVR" to get more information.
7.7.3. DeVICe ReMOVeD
Before remove your external device, select this option.
Note: We cannot guarantee compatibility (operation and/or bus power) with all
USB mass storage devices and assumes no responsibility for any loss of data that may occur
when connected to this unit.
With large amounts of data, it may take longer for the system to read the contents of a USB device.
Some USB devices may not be properly recognized.
Even when they are in a supported format, some files may not play or display depending on the
content.
7.7.4. DeVICe
Select the storage device and partition where the recordings will be stored. You can also format
the device
8. pVR
The system supports two recording modes
for MPEG-2 DVB-T broadcasting channels
(One button recording and Scheduled
recording) as follows bellow. You can read
the files you had recorded by accessing to
Menu->USB->Multimedia->My Recorder,
Summary of Contents for Energy TDT HD5
Page 1: ...ENGLISH User manual...
