ENERGY SISTEM M3500, User Manual

7

3.2.  BATTERY

Pull the battery loader out and insert a CR2025 battery.
 

2

1

Make sure to place the battery in the correct direction.
When not using the remote control for a long time remove the 
battery.
When operating range reduces replace the battery.

4.  SETUP

4.1.  INSERTING A DISC

1. 

Press the SOURCE button on the remote control and use the up/down buttons to select the 
source: DVD-ROM Drive. Press the OK button to confirm.

2. 

Press the OPEN/CLOSE button to open the disc cover.

3. 

Insert a disc, then close gently the cover. The unit will read the disc and start to play it, or it will 
display a start menu

4.2.  CONNECTING A USB DEVICE

Connect a USB device to the unit. Press the SOURCE button on the remote control and use the up/
down buttons to select the source: DVD, DVB or USB. Press the OK button to confirm.

4.3.  DVB-T FIRST TIME INSTALLATION

When DVB mode is used for the first time, the screen will display the First Time Installation page. This 
will guide the user through the initial DVB mode setup.
First, choose “Yes”, then press the OK button. The system will then start the initial setup.
Then select the relevant regional information (country, OSD language and Time Zone). The system 
will automatically scan through the channels according to the information you have entered.
Select “Yes” to start the automatic search.
At the end of the search, the system will go to DVB mode in order to view the channels found.