5
1.1.2. Connection with computer
P2350 can cummunicate at USB1.1 (12Mbps) or USB2.0 (480Mbps) speed with the computer. It is
recommended to use USB2.0 which allows faster transfer rates. If your computer has a mix of USB1.1
and USB2.0 ports read the corresponding manual to be able to select the appropriate port.
1.1.3. Device detection
Windows 98SE
In Windows 98SE, install the device driver included in the CD-ROM.
You can also download the driver at www.energysistem.com.
1.
Run setup.exe file before connecting P2350.
2.
Reboot after finishing installation.
3.
Connect P2350 to the computer. An ‘Add New Hardware’ procedure will start; follow the
suggested steps.
4.
Check that the hard disk drive inside the player is listed on the ‘Device Manager’ tab.
Windows Me/2000/XP/Vista, Mac OS X, Linux
This operating systems have built-in support for external USB hard disks so you don’t need to install
any driver.
To prevent file system corruption remember to follow the correct steps when disconnecting P2350
from the computer:
≥
Windows: Use the ‘Safely remove hardware’ procedure.
≥
Mac OS: Discard the corresponding Desktop icon into Trash Bin before disconnecting P2350 from
USB port.
