background image

LIMITED WARRANTY  POLICY

Warranty Protection

Energy

warrants this product to the retail purchaser against any failure resulting from

original manufacturing defects in workmanship or materials.The warranty is in effect for
a period of (5) years from date of purchase from an authorized 

Energy

dealer and is

valid only if the original dated bill of sale is presented when service is required.

The warranty does not cover damage caused during shipment, by accident, misuse,
abuse, neglect, unauthorized product modification, failure to follow the instructions 
outlined in the owner’s manual, failure to perform routine maintenance, damage
resulting from unauthorized repairs or claims based upon misrepresentations of the
warranty by the seller.

Warranty Service

If you require service for your 

Energy

loudspeaker(s) at any time during the (5) five

year warranty period, please contact 1) the dealer from whom you purchased the
product(s), 2) 

Energy

National Service, 203 Eggert Road, Buffalo, N.Y. 14215 

Tel 716 896-9801 or 3) 

Energy

Loudspeakers, a division of Audio Products

International Corp., 3641 McNicoll Avenue, Scarborough, Ontario, Canada, M1X 1G5,
Tel 416 321-1800.You will be responsible for transporting the speakers in adequate
packaging to protect them from damage in transit and for the shipping costs to an
authorized 

Energy

service center or to 

Energy 

Loudspeakers. If the product is

returned for repair to 

Energy

Loudspeakers in Scarborough or Buffalo, the costs of 

the return shipment to you will be paid by 

Energy

, provided the repairs concerned 

fall within the Limited Warranty.

Energy

Warranty is limited to repair or replacement of 

Energy

products. It does 

not cover any incidental or consequential damage of any kind. If the provisions in any 
advertisement, packing cartons or literature differ from those specified in this warranty,
the terms of the Limited Warranty prevail.

Warranty  Outside of the United States and Canada

Product warranties may be legislated differently from one country to another. Ask your
local 

Energy

dealer for details of the LIMITED WARRANTY applicable in your country.

c o n n o i s s e u r   &   p r o   s e r i e s

o w n e r s   m a n u a l

10

Summary of Contents for Connoisseur C-2













Reviews: