9
8.2 Opening and Closing the Safety Guard
The safety guard contains a U-shaped handle at the
hinged end. Use this handle to open and close the
guard.
Open the safety guard as shown in Figure 3.
Figure 3, Opening the Safety Guard
Close the safety guard as shown in Figure 4.
Figure 4, Closing the Safety Guard
8.3 Trigger On-Off Switch
NOTICE:
WARNING
To prevent serious personal injury, be
certain that hands, fingers and other body parts are
away from the cutting area before depressing the
cutter trigger.
A trigger mounted in the cutter grip controls cutter
operation. Pressing the trigger automatically starts the
cutter electric motor.
• Press and hold the trigger to advance the piston and
slide the moving blade forward. See Figures 5 and 6.
• Release the trigger at any time to stop the piston and
moving blade. Be advised that there may be a brief
delay until the piston comes to a complete stop.
Figure 5, Trigger On-Off Switch
NOTICE:
WARNING
The cutter safety guard is not shown in
Figures 6 and 7 for illustration purposes only. Never
operate the cutter with the safety guard open or
removed.
Figure 6, Piston and Blade Fully Advanced
Figure 7, Piston and Blade Fully Retracted
(“Home”) Position
Summary of Contents for ECCE26
Page 24: ...WWW ENERPAC COM...
