9
8.2 Opening and Closing the Cutting Head
The cutting head can be opened and closed to allow the
material to be inserted into the cutting head.
NOTICE:
WARNING
Be certain that cutter is off before
opening or closing the cutting head. Serious personal
injury may result if this precaution is not observed.
To open the cutting head:
lift the locking latch to
disengage it. Then, swing the cutting head away from
the cutter body. See Figure 2.
Figure 2, Opening the Cutting Head
To close the cutting head:
swing the cutting head
toward the cutter body and feed the locking latch
through the opening in the positioning handle. Then,
rotate the locking latch downward until it engages and
locks the cutting head in place. See Figure 3.
Figure 3, Closing the Cutting Head
