Enerpac SBL1100 Instruction And Maintenance Manual Download

Page: 10 / 151

Document number: ED. 03622.00.001.R04.ENG

Page 10 of 151

ED.02518.00.001.R08.ENG

Page 10

d) verifying that the system has the necessary capacity to perform the proposed operations in

the planned configuration.

e) ensuring the assigned operators have has been notified of adjustments or repairs that

have not yet been completed, prior to commencing operations.

f) designating

personnel

for

inspections as required in the applicable chapter.

g) designating personnel for maintenance, repair, transport, assembly, and disassembly.
h) ensuring that all personnel involved in maintenance, repair, transport, assembly,

disassembly, and inspection are aware of their responsibilities, assigned duties, and the
associated hazards.

i) ensuring that the inspection, testing, and maintenance programs specified by owner are

followed.

1.8.3. The

site

supervisor

In some cases the site supervisor and the system director may be the same person.

The responsibilities of the site supervisor shall include the following:
a)  ensuring that the system meets the requirements prior to initial site usage.
b)  determining if additional regulations or requirements are applicable.
c)  ensuring that a qualified person is designated as the system director.
d)  ensuring that the operations are coordinated with other jobsite activities that will be

affected by or will affect the operations.

e) ensuring that the area for the system is adequately prepared. The preparation includes,

but is not limited to, the following:
1.  access for the system and associated equipment.
2.  sufficient room to assemble and disassemble the system.
3.  an operating area that is suitable for the system with respect to levelness, surface

conditions, support capability, proximity to power lines, excavations, slopes,
underground utilities, subsurface construction, and obstructions to operation.

4. traffic control as necessary to restrict unauthorized access to the system's working

area.

5. ensuring that work involving the assembly and disassembly of system is supervised by

a qualified person .

6. ensuring that operators meet the physical, knowledge, and skill requirements as

described in this manual.

7. ensuring that conditions that may adversely affect the operations are addressed. Such

conditions include, but are not limited to, the following:

poor soil or support conditions

wind velocity or gusting winds

weather

conditions

extreme

temperatures

inadequate

lighting

operating

surface

conditions

excessive noise proximity to energized sources (e.g., power lines, pressurized

lines)

ensuring that work performed by the rigging crew is supervised by a qualified

person

ensuring that maintenance is performed by a designated person

1.8.4.

The system director

The system Director's responsibilities shall include the following:

a) being present at the job site during the operations.
b) stopping the operations if alerted to an unsafe condition.
c) ensuring that the preparation of the area needed to support the operation has been

completed before the operation starts.

d) ensuring necessary traffic controls are in place to restrict unauthorized access to the

system's work area.