Enerpac XC-Series, Instruction Manual

5

4

General Safety

Never set the relief valve to a higher pressure than the maximum 
rated pressure of the pump. Higher settings may result in equipment 
damage or personal injury. Do not remove relief valve.    

To avoid personal injury keep hands and feet away from cylinder and 
work piece during operation. 

Do not handle pressurized hoses. 
Escaping oil under pressure can penetrate the skin, causing serious 
injury. If oil is injected under the skin, see a doctor immediately.

Do not pressurize disconnected couplers.

Safety First

Read all instructions, DANGER, WARNING and 
CAUTION paragraphs carefully.  
Follow all safety precautions to avoid personal 
injury or property damage during system 
operation. Save these instructions.

ENERPAC cannot be responsible for damage or 
injury resulting from unsafe product use, lack of 
maintenance or incorrect product and/or system 
operation.  Contact ENERPAC when in doubt as 
to the safety precautions and operations

Conformance to        

National & International 

Standards.

We declare that this product has been tested 
and conforms to applicable standards and is 
approved to carry the CE, TUV C and US, and 
FCC certification marks. An EC Declaration of 
Conformity is enclosed separately.

Model / Serial Number

The model and serial number are found on the 
back side of unit, above the battery area.

Important

Danger icons are only used when your action or lack 

of action may cause serious injury or even death.

Failure to comply with DANGER, WARNING or CAUTION statements 
could cause equipment damage and personal injury.

General Safety   

4

Electrical Safety  

6

Installation  

7

Use  

8

Operation 9
Disconnecting 10
Oil Fill   

11

Pressure Setting 

12

Technical Specifications  

13

Troubleshooting 14

Contents