Enerpac XC-Series, Instruction Manual

7

6

Electrical Safety

Failure to comply with DANGER, WARNING or CAUTION statements 
could cause equipment damage and personal injury.

Do not operate the pump in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. The pump creates sparks which may ignite the dust of fumes. 

Do not expose the pump to rain or wet conditions. Water entering the pump will increase the risk of shock.

To avoid accidental starting, when carrying or moving the pump ensure the safety switch is in the locked position, and do not carry with hand or fingers on the trigger.

Do not operate pump if safety switch does not function. Seek repair assistance from an ENERPAC service center.

Remove battery pack from the pump before making any adjustments, performing maintenance or storing the pump.

Ensure the switch is in the locked position prior to inserting the battery pack. 

Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create risk of fire when used with another battery pack.

Use the ENERPAC XC-Series pump only with MILWAUKEE ELECTRIC TOOL M28

TM

 or V28

TM

 Li-Ion battery packs. Use of any other battery packs may create risk of injury or fire.

When battery pack is not in use, keep it away from other metal objects like paperclips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to 
another. Shorting the battery terminals together may cause burns or fire. 

Under abusive conditions, liquid may be ejected from the battery. Avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected 
from the battery can cause irritation or burns. 

Read and understand the safety and operation instructions provided separately with the MILWAUKEE ELECTRIC TOOL battery and charger.

Additional Warnings for Battery Operated Electric Pumps.

WARNING