017-220-J0 Rev C
62
9.7.2 Main Menu Screen
Once HyperTerminal is open, ensure that the Alpha Micro 100 has connected to the computer. See Figure 51 for
connection indicators.
The main menu screen shows the Alpha Micro 100 current input and output values, displays any faults or alarms
and gives access to the submenus. The Alpha Micro 100 is controlled by submenu 3.
To access a particular submenu, type in the submenu number and press
Enter
. To update the main menu screen,
press
Enter
.
The complete menu tree is shown in Figure 52. There are also tables describing the Line Status (Table L), Output
Status (Table M), Faults (Table N) and Alarms (Table O).
a. The readings on the main menu screen do not automatically update to reflect changes in the Alpha Micro
100 status. Press
Enter
to update the screen.
b. For many functions you need to enter a password. The factory setting is
1111
.
Figure 51 — Main Menu Screen
Submenu Numbers
Shows connected.
Status, Faults and
Alarms Displays
Telephone symbol is
off-hook when connected
Summary of Contents for Alpha Micro 100
