background image

 

 

37

 

 

5.2 Inspection and Replacement of Quick-wear Parts 

5.2.1 Filter Capacitor   

The pulsating current of main loop will affect the performance of filter capacitor of aluminium 

electrolysis.  The  affected  degree  and  environment  temperature  are  related  to  service  environment. 
Under normal conditions, the inverter shall change electrolytic capacitor once every 10 years. When 
electrolyte  of  electrolytic  capacitor  leaks,  safety  valve  emits,  or  capacitance  expands,  replace  it 
immediately.   

5.2.2 Fax cooling   

In BS series pumping inverter, the inverter above BS-22K has cooling fan inside. The service 

life of cooling fan is about 15000 houBS-. If fan has abnormal nose or generates vibration, replace 
it immediately.   

5.3 Storage and Maintenance   

5.3.1 Storage   

After purchasing inverter, if you do not use it temporarily or decide to store it for a long time, 

pay attention to the following items:   

1.

 

Avoid putting inverter on the places in which temperature is high, air is  humid, or places 

where there is vibration or metal dust. Guarantee good ventilation.   

2.

 

If  the  inverter  is  not  used  for  a  long  term,  the  internal  filter  capacitor  characteristic  will 

decrease. Power on twice every two years to recover the characteristics of filter capacitor. 
At the same time, check the functions of inverter. During power-on, gradually increase the 
voltage through DC power supply. The power-on time shall not be less than 5 hours.   

5.3.2 Maintenance   

The  warranty  period  of  inverter  is  2  years(since  production  date).  During  warranty  period,  if 

inverter  suffers  failure  or  damage  under  normal  conditions,  our  company  provides  maintenance 
service free of charge. After warranty period, our company also provides paid maintenance services. 

During  warranty  period,  if  the  failure  is  caused  due  to  the  following  reasons,  some 

maintenance fees will be charged. 

1. Failure caused by violation of operation manual or standards;   

2. Without authorization, user repairs and transforms the inverter.   

3. Failure caused by improper storage;   

4. Use inverter for abnormal functions;   

5.  Failure  caused  by  fire  disaster,  salt  corrosion,  gas  corrosion,  earthquake,  windstorm, 
flood, lightning, abnormal voltage, or other force majeure.   

  Notice: the warranty scope only refers to inverter body.   

 

 

Summary of Contents for BS-1100-L
















































Reviews: