background image

9

Ventilation unit operation and maintenance instructions

Use of the ventilation during 

the cold season

A correctly designed and used ventilation system reduces 
costs and saves energy. In addition, it promotes the health 
of both the living environment and the residents.

• 

Always use the ventilation system according to the 
plan drawn up for your home – around the year.

• 

Clean or replace the filters when the system advises 
you to do so and vacuum-clean the interior of the unit 
regularly. 

• 

Open the lid of the ventilation unit and take a look 
inside the unit regularly, e.g. once a month.

• 

Dust or other impurities in the air may accumulate 
in the equipment. Dirt blocks the filters and adheres 
to the heat exchanger and weakens the efficiency of 
ventilation.

• 

Use special modes, such as Fireplace mode, only 
when necessary. 

• 

The unnecessary use of special modes increases 
energy consumption.

• 

Instead of or in addition to adjusting the ventilation 
system, you can improve living comfort by using 
traditional methods:

• 

Keep the curtains and windows closed on hot days 
in order to keep out the heat of the sun. Dress more 
warmly on cold days. This will help you to save a lot of 
energy.

• 

Use only spare parts approved by Enervent.

• 

Use original filters only. They have been designed 
to ensure the best possible performance of your 
ventilation system.

• 

Use 

Eco

 mode in order to save energy and reduce 

costs, without compromising the quality of indoor air.

EFFICIENT USE OF THE VENTILATION

Do not reduce ventilation or switch it off when the 
outdoor temperature drops. Instead of decreasing, the 
costs may increase. Your ventilation system is the result 
of a professional system designer. Changes in the outside 
temperature have been taken into consideration in 
designing the system and the unit. If there are no changes 
in your daily routines, no adjustments are required in the 
ventilation system.

If you reduce airflow in cold weather, ice may form inside 
the ventilation unit. The risk is especially high in extremely 
cold weather and when the indoor air humidity is high 
(the shower is used frequently and large amounts of 
laundry are dried).

If the structure of the ventilation system needs to be 
updated, contact the designer of the system.

Reducing ventilation may cause serious damage 

to the structures of your house.

CAUTION

Summary of Contents for Pinion





















Reviews: