background image

22

010.1220.0719  01.21

7. WARRANTY TERMS – BEFx

ENERVEX warrants the BEFx Ventilator Fan against functional 
failure due to defects in material and workmanship for a period 
of two (2) years from date of delivery to the construction site. 
Functional failure is defined as any failure of the fan to perform 
its intended function of exhausting grease-laden and creosote-
laden exhaust. During this period, any BEFx Ventilator Fan 
supplied by ENERVEX failing to perform its intended function 
will be repaired or replaced, at the manufacturer’s option, 
following determination by a factory authorized inspector that a 
functional failure has occurred.
This warranty is limited to repair or replacement of the product 
(including, but not limited to, motor and housing) plus shipping 
cost to the failure location. This warranty does not cover any 
labor cost for removal or replacement of the defective product 
nor does this warranty cover any component not furbished by 
ENERVEX and installed as part of the system.
This warranty is a two-way agreement. ENERVEX promises 
to supply free replacements as stated, but the user agrees 
that, except for our obligation to make good on this promise, 
ENERVEX shall not be responsible for any expense or 
inconvenience which the user might incur or experience with 
respect to the product, nor shall ENERVEX be liable for defects, 
damage or failures, caused by unauthorized alterations, 
unreasonable use, accident or abuse, including failure to provide 

reasonable and necessary maintenance, after the product has 
been delivered. Some states do not allow the exclusion or 
limitation of incidental or consequential damages, so the above 
limitations or exclusions may not apply to you.
ENERVEX assumes no liability for incidental or consequential 
damages of any kind or for any damages resulting in whole 
or in part from misuse, improper installation, or inadequate 
maintenance of the system or any component part thereof. This 
warranty is in lieu of all other express warranties or guarantees 
of any kind. All implied warranties, including merchantability 
and fitness, are limited to the duration of the express warranty 
contained herein. ENERVEX neither assumes nor does it 
authorize any other person to assume on its behalf any other 
liability in connection with the sale of its product.
In addition, we promise the original user that we will replace 
or repair as we may elect, any parts or parts of the ENERVEX 
chimney fan which are perforated due to corrosion without 
charge for parts or labor (not including dismantling, installation, 
freight, etc.) during the first 10 years following the date of 
installation.
For prompt warranty service, contact the ENERVEX Customer 
Service Department, 1685 Bluegrass Lakes Parkway, 
Alpharetta, GA 30004.

Summary of Contents for BEF 225x

























Reviews: