Figure: 3 - Mini MT Side View (Showing Push to Call Button)
Figure: 4 - Mini MT Side View (Showing USB Port)
2.3 LEDs
There are four LEDs used to provide status to the user. The LED functions are defined in the table below.
CALL
(Yellow)
ON
(Yellow)
GPS
(Yellow)
BAT
(Red)
Hibernate
OFF
OFF
OFF
If the battery charge level is
<20%, the BAT LED blinks
slowly, i.e. every 10 seconds.
OFF if the battery charge
level is less than 5%
Active /
Blinks on for 500ms, off
for 1s, when receiving or
Slow Blink on
for 500 ms, off
Blinks on for 500ms, off
for 2s, when locked.
If the battery charge level is
<20%, the BAT LED blinks
Summary of Contents for Enfora Mini MT
