ENFORCER Wireless Video Door Phone
8
SECO-LARM U.S.A., Inc.
On-Screen Display Features:
Photos – View and delete photos taken by the camera station. There are four different
types of photos
M – Photos taken by the user manually (1 photo taken).
A – Photos taken by the camera station automatically when the doorbell button
is pressed (1 photo taken).
T – Photos taken by the camera station automatically when the unit is removed
from the bracket and the tamper alarm activates (4 photos taken).
P – Photos taken by the camera station automatically when the PIR function is
activated (3 photos taken).
Messages – View photos from missed calls, same as "Automatic" photos.
Time – Set the time and date.
Ring – Choose from four different ring tones (Telephone, Doorbell, Für Elise, or Jingle
Bells) and set ring volume (six volume levels).
Language – Choose from English, German, Spanish, French, Russian, or Chinese
language formats.
Setup – Set advanced settings such as Motion detection, Backlight time, Unlocking
duration, Pairing, Alarm settings, or Version information.
ENFORCER Wireless Video Door Phone
SECO-LARM U.S.A., Inc.
9
Programming and Using the On-Screen Display:
1.
While the monitor display is on, press the "Menu/Unlock" button to open the on-screen display.
2.
Use the "Up" and "Down" buttons to move the cursor up or down. Use the "Menu/Unlock" button
to move the cursor to the right.
3.
To select a Menu option, highlight the option and press the "OK" button.
4.
To exit the on-screen display, press the "Exit" button.
NOTE: If there is no activity, the monitor will exit programming mode and the display will turn off in
35 seconds.
Viewing and deleting photos:
1.
While the monitor display is on, press the "Menu/Unlock" button to open the on-screen display.
2.
Highlight the "Photo" icon and press the "OK" button to enter the "Photo" screen.
3.
Use the "Up" and "Down" buttons to select the photo to be viewed.
NOTE: Photos are saved with the following format: "X-HHMMSS-YYMMDD.jpg" with "X"
being the type of photo, "HHMMSS" being the time the photo was taken, and
"YYMMDD" being the date the photo was taken.
4.
Press the "OK" button and select from "View," "Delete," or "Delete All."
a.
Press "View" to view a photo.
b.
Press "Delete" to delete the selected photo (after an additional prompt).
c.
Press "Delete All" to delete all photos (after an additional prompt).
5.
Once viewing a photo, press the "Up" or "Down" buttons to cycle through other photos.
6.
Press the "OK" button to either delete or exit the photo viewing mode and go back to the
on-screen display menu.
NOTE: The monitor can save up to 240 photos. Photos are saved in a "first-in, first-out" method,
meaning that the system automatically deletes the oldest photo.
NOTE: There is no way to export any of the photos on the device.
Viewing and deleting messages:
1.
While the monitor display is on, press the "Menu/Unlock" button to open the on-screen display.
2.
Highlight the "Messages" icon and press the "OK" button to enter the "Messages" screen.
3.
Use the "Up" and "Down" buttons to select the message to be viewed.
NOTE: Messages are the same as Automatic photos but are saved with the following format:
"HH:MM:SS MM-DD-YYYY."
4.
Press the "OK" button and select from "Open," "Delete," or "Delete All."
a.
Press "Open" to view a message.
b.
Press "Delete" to delete the selected message (after an additional prompt).
c.
Press "Delete All" to delete all messages (after an additional prompt).
5.
Once viewing a message, press the "OK" button to return to the "Messages" screen.
NOTE: The monitor can save up to 10 messages. Messages are saved in a "first-in, first-out"
method, meaning that the system automatically deletes the oldest message.
NOTE: Messages will not be saved if the indoor monitor is off.
