background image

ENFORCER 24 LED CCD IR D

AY

/N

IGHT

 C

AMERA

 M

ANUAL

 

 

 

   

 

 

E

M

SECO-LARM

®

®

®

®

®

IR_24LQseries_076.PMD

PITNW1

®

Weatherproof

•  Check that the camera is powered up.
•  Check that the power supply’s polarity is correct.
•  Check that the monitor is powered up.
•  Check that the video cable connecting the camera to the monitor is connected properly.

•  Clean the lens (using a soft, clean cloth).
•  Check that the light source is adequate.

•  Adjust the monitor’s contrast knob.
•  Change the position of the camera.

•  Change the position of the camera.

•  Change the position of the camera.

•  Check that the correct power supply is in use.

•  Check that the correct power supply is in use.

The screen is blank

The screen image is dim

The screen image has poor contrast

The screen image flickers

The screen image is distorted

The camera case is hot

IR LEDs do not turn on

TROUBLE SHOOTING

Note: Products with model number that ends with "Q" or have a round green "Q" sticker represents RoHS compliant products.

C -

M

C -

M

SECO-LARM

SECO-LARM

®

 

., 

 U

  c

 U

.,  c

 U.S.A., Inc.

 U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA  92606

Tel: 800-662-0800 / 949-261-2999   Fax: 949-261-7326

Website: www.seco-larm.com

E-mail: sales@seco-larm.com

ENFORCER

*

All viewing angles are approximate

1/3" CCD Color IR Day/Night Camera with 24 LEDs

Video

Format

Model

Number

Lens

Size

Viewing*

Angle

EV-132C-DWL6Q
EV-132C-DWL8Q
EV-132C-DWLDQ
EV-132C-DWLHQ
EV-135C-DWL6Q
EV-135C-DWL8Q
EV-135C-DWLDQ
EV-135C-DWLHQ

NTSC
NTSC
NTSC
NTSC

PAL
PAL
PAL
PAL

6mm
8mm

12mm
16mm

6mm
8mm

12mm
16mm

53

o

39

o

26

o

19

o

53

o

39

o

26

o

19

o

VIDEO

®

IMPORTANT

Users and installers of this product are responsible for ensuring this product complies with all national, state, and local laws and

statutes related to monitoring and recording audio and video signals. 

SECO-LARM

 will not be held responsible for the use of this

product in violation of any current laws or statutes.

WARNING

Stop using the camera if you see a malfunction like smoke or unusual heat, as it could cause fire or electric shock. Do not open the

case of this device, as there are no field-serviceable components inside.

FCC COMPLIANCE STATEMENT

Information to the user: This equipment has been tested and found to comply with the limits for a class a digital device, pursuant to

part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to

correct the interference at his own expense.

NOTICE

The information and specifications printed in this manual are current at the time of publication.  However, the SECO-LARM policy is

one of continual development and improvement.  For this reason, SECO-LARM reserves the right to change specifications without

notice.  SECO-LARM is also not responsible for misprints or typographical errors.

Copyright © 2007 SECO-LARM U.S.A., Inc.  All rights reserved.  This material may not be reproduced or copied, in whole or in part,

without the written permission of SECO-LARM.

WARRANTY:

 

This SECO-LARM product is warranted against defects in material and workmanship while used in normal service

for a period of one (1) year from the date of sale to the original consumer customer.  SECO-LARM’s obligation is limited to the repair

or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.

This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair, or

alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment

is not operating properly as a result of causes other than defects in material and workmanship.

The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only, at SECO-LARM’s

option.   In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property damages of any

kind to the purchaser or anyone else.

MANUAL

Reviews: