ENFORCER
12” Mirror Camera
6
SECO-LARM U.S.A., Inc.
Continued on next page
White Balance (WHITE BAL.):
This function adjusts the camera’s white balance.
1.
Select WHITE BAL. on the main SETUP menu screen.
2.
Select the desired white balance mode by moving the joystick LEFT or RIGHT. When
appears, press the joystick in to access a submenu.
3.
Select RETURN and press in the joystick to move back one screen.
NOTE: A submenu is available when
appears.
SETUP
LENS
MANUAL
EXPOSURE
WHITE BAL.
ATW1
BACKLIGHT
OFF
DAY&NIGHT
AUTO
DPC
SPECIAL
RESET
EXIT
Backlight (Backlight/Highlight Compensation):
This function is used to control the light level to overcome strong back light conditions.
1.
Select BACKLIGHT on the main SETUP menu screen.
2.
Select the desired backlight mode by moving the joystick LEFT or RIGHT. Press the
joystick in to access a submenu.
3.
Select RETURN and press in the joystick to move back one screen.
NOTE: A submenu is available when
appears.
BLC
AREA SEL.
AREA 1
AREA STATE
ON
GAIN
128
HEIGHT
005
WIDTH
004
LEFT/RIGHT
006
TOP/BOTTOM
005
RETURN
RET
A.
ATW1 – Automatic Tracking White, mode 1
B.
ATW2 – Automatic Tracking White, mode 2
C.
AWC→SET – Automatic white balance
setting. Point the camera at a white object
and press enter. The colors will be
balanced based on the object.
D.
ANTI. CRL – Anti-Color Rolling.
E.
MANUAL – Allows COLOR TEMP (color
temperature) to be set to INDOOR,
OUTDOOR, or MANUAL.
(Default: INDOOR)
NOTE: If the MANUAL setting is chosen, the BLUE and RED levels can be adjusted.
A.
BLC: Program the Backlight Compensation (BLC) function to better display an object
in front of a bright light source.
AREA SEL – Select one of two areas
on the screen to adjust for BLC.
AREA STATE – Turn the selected
area ON or OFF. (Default: ON)
GAIN – Set the GAIN level.
(Default: 128)
HEIGHT – Adjust the height of the
selected area. (Default: 005)
WIDTH – Adjust the width of the
selected area. (Default: 004)
LEFT/RIGHT – Adjust the horizontal position of the selected area. (Default: 006)
TOP/BOTTOM – Adjust the vertical position of the selected area. (Default: 005)
