16
ENFORCER Vandal Resistant Access Control Keypads
SECO-LARM U.S.A., Inc.
Programming User Codes and Proximity Cards:
When programming user codes and/or proximity cards*, use this general formula:
AA B CCC DDDD #
A
– Output
B
– Security Level (or
5
, to delete a user code or card*)
C
– User ID
D
– User Code/Proximity Card*
Outputs:
•
10
– Output #1, up to 1,000 possible user codes and/or proximity cards*.
•
20
– Output #2, up to 100 possible user codes and/or proximity cards*.
Security Levels and Card*/Code Deletion:
There are four possible security levels for the keypad:
•
1
Card only* – The most basic, convenient level of security. Just tap a previously-programmed
proximity card over the keypad to activate outputs #1 or #2.
NOTE:
The duress code feature cannot be used with the keypad programmed to the “card only”
security mode. However, a duress code can be entered instead of a card.
•
2
User code only – Type in a 4 to 8-digit user code to activate outputs #1 or #2
•
3
Card + Unique user code* – The most secure level. This code is programmed separately
for each card and can be unique to the card, or the same code can be used for a group or
department. The card and code must be used together to operate the output.
•
4
Card + Common user code* – All valid proximity cards can be programmed with a single
common user code so that outputs #1 or #2 can only be activated if one of the cards and the
common user code are used together. The common user code is automatically assigned as each
proximity card is programmed into the keypad.
•
5
– Delete a programmed proximity card* or user code.
•
0999
– Delete all programmed proximity cards* or codes for the selected output.
Programming Common User Codes (continued):
NOTE
:
•
XXXX
represents the new common user code, which can be 4 to 8 digits long.
•
Programming a new common user code will overwrite the previous common user code.
•
A common user code is not necessary if unique user codes are assigned.
•
The
master
,
super user
,
common user
,
visitor, duress
and
user codes
cannot
be the same.
*SK-1123-SPQ only
