20
ENFORCER Vandal Resistant Access Control Keypads
SECO-LARM U.S.A., Inc.
Programming Duress Codes (continued):
Examples:
1.
Set the duress ID #01 code for output #1 to 2369:
41 01 2369 #
2.
Set the duress ID #01 code for output #2 to 23980:
42 01 23980 #
3.
Delete the duress ID #01 code for output #1 from memory:
41 01 #
4.
Delete all duress codes for output #1 from memory:
41 0999 #
Operating Duress Codes:
If a duress code is used in place of a normal user code, both the appropriate outputs #1 or #2 and
the duress output will be activated. However, a duress code
cannot
deactivate the duress output.
Only a
normal user code/card*
,
super user code
, or a
master code
can deactivate the duress
output.
NOTE
: A duress code can also be used in conjunction with a user card to activate the duress
output. However, a user card alone cannot activate the duress output.
Examples:
In these examples, assume that
2369
is an output #1 duress code and that
1369
is a user code.
1. Activate the duress output and output #1 using the duress code:
2369 #
NOTE
: Subsequently entering the duress code will activate output #1 again, but will not
deactivate the duress output.
2.
Deactivate the duress output using the user code:
1369 #
3. Activate the duress output and activate output #1 using the duress code and a user card*:
READ CARD
2369 #
*SK-1123-SPQ only
