CenCon
2
INTRODUCTION
This technical manual is intended for technicians and factory personnel already familiar with the operation of
Engineered Air equipment, control strategies and combustion setup.
The CenCon and expansion modules have been certified by Intertek (ETL) for use with Engineered Air
appliances only, evaluated to CSA 22.2 No. 24 Temperature Indicating and Regulating Equipment and UL873
Standard for Safety Temperature Indicating and Regulating Equipment.
If any errors or omissions are noted please contact the nearest Engineered Air Technical Service Department.
To ensure warranty is honored, only qualified personnel should be employed for service or troubleshooting. If
further information is required please contact the nearest Engineered Air sales office.
Copyright
This document and the information in it are the property of Engineered Air, and may not be used or reproduced
in whole or in part without written permission. Engineered Air reserves the right to revise this publication at
any time, and to make changes to its content without obligation to notify any person of such revision or
change.
