35
Making a Telephone Call (For DuraFon PRO only)
1.
Press
, wait for dial tone, and then enter phone number.
2.
Alternatively, you can enter phone number first then press
key.
When using this method, you can use the
CLEAR
(Left) and
DELETE
(Right) soft keys to edit the number entered. “Delete” erases the
last digit entered. “Clear” erases the entire line but remains in the
dialing mode.
3.
Speed dial
by access the entries in the phone book
a.
Press
or
scrolling key to enter the phone book
b.
Press
to dial the number.
4.
To abort dialing, press
key.
5.
During the call, press and hold the
key to activate the
speakerphone.
Notes:
1.
After a link
is established, the Base ID will appear on the upper-right
corner. If no Base ID shows up, it implies that you are approaching the
boundary of the coverage.
2.
If the line is occupied, the LCD shows “No Line Available” and handset
returns to standby mode.
3.
If a link cannot be established, the LCD will show “No Base” after a 12-
second time out.
4.
A call duration timer will start displaying the length of the call after link is
established.
Making a 2-Way/ Intercom Call
The EnGenius Industrial Cordless Phone System offers private, Intercom/
2-way radio calls independent of the base station. Intercom/ 2-way
communication can be placed from handset to handset.
Handset to Handset Calls
1. Press
key followed by a two-digit handset ID or Group ID.
36
2.
Press
key to end the call.
3.
During the call, press and hold the
key, the speakerphone is
active.
Notes:
8.
Intercom calls can be made regardless if the Base Station is present.
9.
If a Group ID is entered, the first handset (belonging to that group)
that answers will establish a link with the caller. See Handset Group
Subscription.
10.
If a link cannot be established, the LCD shows “No Connection” after
a 12-second time out.
Making a Broadcast
1. Broadcasting all handsets
a.
Press & hold
key from one handset
b. A series of beeps will indicate initiation of handset broadcast
to all handsets within communication coverage
c.
Begin speaking after the series of beeps has ended.
d.
Release
key to end the broadcasting
2. Broadcasting a group of handsets
a.
Enter the Group ID and then press & hold
key
b. A series of beeps will indicate initiation of handset broadcast to
all handsets within communication coverage
c.
Begin speaking after the series of beeps has ended.
d.
Release
key to end the broadcasting
3. Broadcasting an individual handset
a.
Enter the Handset ID and then press & hold
key
b. A series of beeps will indicate initiation of handset broadcast to
all handsets within communication coverage
c.
Begin speaking after the series of beeps has ended.
d.
Release
key to end the broadcasting
Notes:
