~19~
the handset user’s name.
Re: Up to 32-‐characters can be entered.
22. Change Pwd
a. Change the handset password, which requires entering the Call Barring
(
MENU
-‐4-‐3) and Menu Display (
MENU
-‐8).
Re: Default PIN is “0000.”
23. DTMF Duration (from web)
24. Programmable Flash Key Timing (from web)
25. Assign Next Handset ID for New Handsets
a. Use a registered handset from
MENU
-‐6-‐1 to assign a Next Handset ID to a
new handset.
b. If you do not assign Next Handset ID, the system will automatically assign a
handset ID to a new handset.
c. When entering the Base Settings, a PIN is required. The Default is “0000.”
26. Clear Handset
a. Use a registered handset from
MENU
-‐6-‐2 to remove the other registered
handset, in case the other registered handset is defected.
b. Once the other registered handset is clear, the user is able to register a
new handset in its place.
c. When entering the Base Settings, the PIN is required. Default is “0000.”
27. Change PIN
To change the base PIN, enter the “Base Settings” (
MENU
-‐6-‐3).
a. Use a registered handset to change the PIN from
MENU
-‐6-‐3.
b. The default PIN is “0000.”
c. When entering the Base Settings, the PIN is required. The default PIN is
“0000.”
28. Auto Hang Up Feature (from web)
a. From Web, “System-‐Base Settings-‐Auto Hang up” to turn On/Off this auto
hang up feature.
b. If turning On the feature, the handset will automatically hang up the call
when the far-‐end hangs up its call.
29. Mic Gain
Change the handset microphone gain based on the handset’s use in different
environments – Quiet, Normal and Noisy environment.
~20~
a. This requires entering the “Phone Settings” (
MENU
-‐5-‐1).
30. Headset Ring
Change the ringer emitting either from the handset speaker or the headset
receiver.
a. This requires entering the “Phone Settings” (
MENU
-‐5-‐8).
31 Base Intercom Auto-‐Answer (from web)
a. From Web, “System-‐Base Settings-‐Base Intercom Auto-‐Answer” to turn
On/Off the Intercom Auto-‐Answer feature.
b. Default is ON, If turning OFF the feature, you will need to press the base
Intercom or Broadcast key to answer handset Intercom calls to the base.