background image

DURAFON SN902 & SN922 PRODUCT SUPPORT & FAQ’s 

 

Product 

 

SN902 

 
 

 
 

 

SN902 

 

 
 

 

SN902 

 
 

 
 

SN902 

 
 

 
 

SN902 

SP922 

 
 

 

 
 

 
 

SN902 

SP922 

 
 
 

SN902 

SP922 

 
 

 

SN902 

SP922 

 
 

SN902 

SP922 

 
 

 
 

 

Question 

 
How many handsets will 

each base unit support? 
 

 
 

 
How many bases (lines) can 
one handset be assigned?  

 
 

 
How many lines per base?  

 
 

 
 
How can I add an answering 

machine to the system? 
 

 
 

How can I use the music or 
message on hold feature? 

 
 
 

 
 

 
 

Can I charge a spare battery 
while the handset is in the 

charger? 
 
 

Does the charger handset 
slot and spare battery slot 

fast charge? 
 

 
How long does it take to 

charge a battery? 
 
 

What type of battery is 
used? 

 
 

 
 

Answer 

 
The EnGenius SN902 system will 

support 9 handsets per base. Each 
handset can be registered to up to 4 

base units for a total integrated system 
of 36 handsets and 4 base units. 

 
Each EnGenius SN902 handset can be 
registered to up to 4 base units for a 

total integrated system of 36 handsets 
with 4 base units. 

 
Each EnGenius SN902 base will support 

one analog line or extension. Additional 
base units can be added to expand the 

system to up to 4 base units. 
 
The EnGenius SN902 system will 

support an answering machine or a 
corded phone by using the second jack 

on the back of the base unit.  
 

The EnGenius systems will support an 
audio-in device (IE: tape player, CD, 

radio, etc) for music or sales messages 
on hold by plugging in the 3.5mm 
audio-in  cable (purchased separately) 

into the audio-in port on the back of 
the base unit and into an audio device.  

 
 

Yes, the EnGenius rapid charger has a 
spare battery charging slot located 

behind the handset charging slot.  
 
 

Yes, the EnGenius rapid charger, 
charges both the handsets’ battery and 

the spare battery in 90 minutes.  
 

 
The EnGenius rapid charger, charges 

both the handsets’ battery and the 
spare battery in 90 minutes.  
 

The EnGenius battery pack is Lithium 
Ion.  

 
 

 
 

 

Summary of Contents for DURAFON SN902






Reviews: