Installing additional devices
Because of the Mesh capabilities, additional devices can be added wirelessly or by
the wired LAN. If you want to configure it wirelessly, place the additional device close
to the first device with the wired internet access.
Step 1
Confirm that the first device is powered up and connected to your internet router and power up the
additional device. The device status light will start blinking constantly for next 2 minutes.
Step 2
In the wireless network scan you can find the SSIDs by ‘My Hotspot is getting ready’ while the
additional device is preparing itself. Once the initial setup is complete , the device will reboot and
now you will find 3 SSIDs with the data of the additional device: MyHotspot, My Private (key is on
the sticker) and Hotspot [part of user ID]@[IP-address].
6
