~37~
registration, the handset display will show “Please
register”.
Notes:
1.
The base station has a 30 second registration timeout starting
from pressing the PAGE button. The handset has a 6 second
registration timeout starting from the registration or de-
registration option has been selected. The base station and
handset will automatically exit registration mode after
timeout.
2.
Repeat registration or de-registration process if unsuccessful.
Handset Group Subscription
1. Up to nine handset groups (91-99) can be defined and
handsets can decide which group(s) they want to be in.
2. For example, Group 1 represents the Customer Service
Group, Group 2 represents the Sales Group, and Group 3 is
the Marketing Group. Suppose that Handset 11 wants to
receive incoming rings for all Sales and Marketing related
calls. Then handset 11 will need to “subscribe” to Group 2
and Group 3.
Re: the above wording is in regards to intercom <or
broadcast>, not incoming calls.
3. Group Selections:
a.
b.
Press handset
MENU
-4 to enter the Call Settings menu
Press number “2”, handset enters group setting menu.
c. Press
OPTION
soft key and followed by “1” key to
subscribe the group (“9
＃
”,
＃
:1~9). Enter 1~9.
d. Repeat for all desired groups.
e. Delete group selections by pressing
OPTION
soft key
and followed by “2” to Unsubscribe the group.
~38~
Notes:
1.
The handset can change group affiliations at any time.
2.
The base station is not responsible for group assignments.
Consequently, it cannot de-subscribe a handset from a group.
3.
When an intercom caller enters a group ID, all handsets
subscribed to this group will ring. The first handset to answer
will establish a link with the caller. Afterward, it is a one-to-one
call, not a one-to-many call.
Call Transfer
While a telephone call is in progress, you can transfer it between different
handsets.
Direct transfer (Unannounced Transfer)
1. Press
key to put the call on hold.
2. Press
XFER
(Right) soft key, followed by the destination
handset ID, then the held call will be transferred directly.
After the call transferred to the destination handset, the
original handset will go back to standby mode automatically.
00:00:15
Volume: 4
11
MUTE
OPTION
1
Indirect transfer (Announced Transfer)
If you want to talk to the destination handset before the call is
transferred, you can follow the method below:
1. During the call, press
key, followed by entering the
destination handset ID.
00:00:15
Volume: 4
11
MUTE
OPTION
1
2.
At the destination handset, press the
or
to
answer the intercom call. After talking, press
to end
the intercom call. After an intercom call is ended, the phone
on the other end will also go back to standby mode
