35
e. Press and hold the base’s REG button for 2 seconds until
L1, L2, L3, and L4 LED come on.
f. Press the handset number key “2”, this completes the de-
registration process. Upon successful de-registration, the
handset will show ID “00”.
Notes:
1. The base has a 30 second registration timeout starting
from pressing the REG button. The handset has a 12
second registration timeout starting from the registration or
de-registration option has been selected. The base and
handset will automatically exit registration mode after
timeout.
2. Repeat registration or de-registration process if
unsuccessful.
Advanced Registration:
1. Advanced registration functions can be performed by
administrator handsets (ID 10 and 11) only.
2. Administrator handsets can perform advanced registration
function as long as in range with the base station. The base
station does not need to be in registration mode.
3. De-register a Handset ID by administrator:
a. Make sure that the administrator handset is within the
coverage range of the base station.
b. Press administrator handset Menu (Right) soft key.
c. Press the number “9”, this will enter the handset
administration menu.
d. Press number “2”, handset enters system setting menu.
e. Press number “1”, and enter the two-digit Handset ID to
be cleared.
f. Upon successful operation, the handset LCD will display
“Done”, otherwise it will show “Message not received, try
again”.
Notes:
1. De-registration by the administrator will disable a handset’s
ability to use the base station to make or receive phone calls.
This also frees up the ID for future registration.
2. Handsets de-registered by the administrator can still perform
36
intercom to other handsets.
4. Obtain a Specific Handset ID:
a. If a particular Handset ID is preferred over sequentially
assigned ID, the administrator can “tell” the base in
advance what the next ID assignment should be.
b. Press administrator handset Menu (Right) soft key.
c. Press the number “9”, this will enter the handset
administration menu.
d. Press number “2”, handset enters system setting menu.
e. Press number “2”, and enter the two-digit Handset ID to
be assigned next by the base.
f. Upon successful operation, the handset LCD will display
“Done,” otherwise it will show “Message not received, try
again.”
g. If the handset ID is already in use by another handset, the
administrator will be alerted. In that case, the
administrator can choose another ID or asks the handset
having the desired ID to vacate by de-registering with the
base.
h. Perform registration immediately afterward for the handset
desiring a specific ID to ensure that the ID is not taken by
another handset.
Handset Group Subscription
1. Up to nine handset groups (1-9) can be defined and handsets
can decide which group(s) they want to be in.
2. For example, Group 1 represents the Customer Service Group,
Group 2 represents the Sales Group, and Group 3 is the
Marketing Group. Suppose that Handset 10 wants to receive
incoming rings for all Sales and Marketing related calls in
addition to calls addressed to his/her own Handset ID. Then
handset 10 will need to “subscribe” to Group 2 and Group 3.
3. Group Selections:
a. Press handset Menu (Right) soft key.
b. Press the number “5”, this will enter the handset setting
menu.
c. Press number “2”, handset enters group select menu.
d. Press ADD (Left) soft key and enter one-digit group
number (1-9) to add membership in a group.
