~37~
de-registration process. Upon successful de-
registration, the handset display will show ”Please
register”.
Notes:
1.
The base station has a 30 second registration timeout starting from
pressing the PAGE button. The handset has a 6 second registration
timeout starting from the registration or de-registration option has
been selected. The base station and handset will automatically exit
registration mode after timeout.
2.
Repeat registration or de-registration process if unsuccessful.
Handset Group Subscription
1. Up to nine handset groups (1-7) can be defined and
handsets can decide which group(s) they want to be in.
2. For example, Group 1 represents the Customer Service
Group, Group 2 represents the Sales Group,
and Group 3 is the Marketing Group. Suppose that Handset
11 wants to receive incoming rings for all Sales and
Marketing related calls. Then handset 11 will need to
“subscribe” to Group 2 and Group 3.
Call Settings
2.Group Setting
SELECT
BACK
3. Group Selections:
a.
b.
Press handset
MENU
-4 to enter the Call Settings menu
Press number
2
, handset enters group setting menu.
c. Press
OPTION
soft key and followed by
1
key to
subscribe the group (“
＃
”,
＃
:1~7). Enter 1~7.
d. Repeat for all desired groups.
e. Delete group selections by pressing
OPTION
soft key
and followed by
2
to Unsubscribe the group.
~38~
Notes:
1.
The handset can change group affiliations at any time.
2.
The base station is not responsible for group assignments.
Consequently, it cannot de-subscribe a handset from a group.
3.
When an intercom caller enters a group ID, all handsets subscribed to
this group will ring. The first handset to answer will establish a link
with the caller. Afterward, it is a one-to-one call, not a one-to-many
call.
Call Transfer
While a telephone call is in progress, you can transfer it between different
handsets.
Direct transfer
1. Press
OPTION
(Right) soft key, followed by the
＊
key to put
the call on hold.
2. Press
OPTION
(Right) soft key, followed by the
1
key or
SELECT
soft key of XFER, pressed destination handset ID,
then the held call will be transferred directly.
After the call transferred to destination handset, the original
handset will go back to standby mode automatically.
Indirect transfer
If you want to talk to the destination handset before the call
transferred, you can follow with below method:
1. During the call, press
key, followed by entering the
destination handset ID.
2.
Press the
of the destination handset to answer the
intercom call, you can now talk to the destination handset.
After the talking, press
to end the intercom call, then
the destination handset is able to pick up the incoming call
