~45~
record will have a “NEW” at the end of the first line of display.
3. When viewing a call record, the number can be dialed, stored to the phonebook or
deleted.
View Call Log
1. To view the call log, press
to enter the Call Log.
Press
or
key to scroll through the numbers and
names when available.
2. Press
OPTION
right soft key, you can
or
key to
choose save, delete, clear all.
a. Save call log:
(1) Press
SELECT
right soft key, you can use
or
key to scrool the name, and press
DELETE
to
edit the name.
Then press
SAVE
left soft key to save the name.
(2) Use
or
key to scrool the number, and
press
DELETE
to edit the number.
Then press
SAVE
left soft key to save the number.
(3) After above process, the call log saved into
phonebook.
b. Delete call log:
(1) Press
SELECT
right soft key followed by
YES
left soft
key to confirm deleting.
c. Clear All:
(1) Press
SELECT
right soft key followed by
YES
left soft
key to confirm clearing all caller ID records.
Call a Caller ID
1. Press
key on idle screen to enter the call log, use
or
key to scrool the call log.
~46~
2.
When display a caller ID, Press
to dial this number.
Call Manager
“Call Manager” feature allows four options
：
1. The first option is “Incoming”. The handset can be selected to enable receiving
the incoming PA, intercom call, line call or line dedicated.
2. The second option is “Outgoing”. The handset can be set to access available
bases automatically or manually or pre-defined telephone line.
3. The third option is “Call Barring”. The handset can be selected to block the calls
which are not allowed.
Note: When enter this menu (Call Manager), you must enter handset’s password
first (4 digits). The default password of handset is “0000”.
Incoming
1.
Press
MENU
(Right) soft key followed by
4
to enter
the Call Settings mode.
Press
3
to select Call Manager followed by entering
handset’s password (4 digits).
Press
1
or
2
if muti-base is on to select Incoming.
a. Press
1
to enable receiving PA On/Off.
Re
：
Default setting is “ON”.
.
b. Press
2
to enable receiving Line On/Off wich include
SIP and FXO line both.
Re
：
Default setting is “ON”.
c.
Press
3
to enable receiving Intercom On/Off.
Re
：
Default setting is “ON”.
(1) By default all incoming calls will ring all handsets.
