20 Middle-voiced (control knob)
A tip from the designer:
21 Treble
A tip from the designer:
Channel 3)
Channel 4)
This Control knob determines the portion of mid frequencies when
Try the
(19) and
(20) voicings out for different applications.
gives you a more expansive sound that is excellent for grinding out heavy-duty
riffs or mid-scooped Lead sounds, while
brings up the low mids, making
it a great choice for very warm and creamy leads. Refer to the leaflet "Sound Setting
Samples" for additional practical hints from Victor Smolski concerning the topic
"Middle Settings" !
This tone control switching option is remotely controllable via footswitch, so you can
adapt the two fundamental Lead sounds on the fly, say to better support rhythm
guitar work, singing leads, and slashing power chords.
To help you get acquainted with the amp's fundamental sounds, I recommend that
you set all tone controls to about the center or 12 o'clock position. For higher-gain,
high-volume lead sounds, your best bet is to turn the Treble and the Presence knob
down to prevent the pickups and speakers from generating feedback (a setting in the
9-to-1 o'clock range is recommended).
Though this passive voicing section's controls range is narrower than that of a
comparable active system, its EQ curve is tweaked specifically for its designated
purpose and will give you satisfying results. What's more, in combination with the
Presence and the Depth Punch control feature in the poweramp stage, you have heaps
of voicing options for tailoring basic sounds to taste.
Determines the level of
. Twist this knob to adjust Channel 3's volume
and dial in the desired balance of levels with Channel 1, 2 and 4.
Because this volume control is located pre effects loop, it also determines the effects
send level for Channel 3.
The red LED to the right of the knob lights up to indicate
is on.
Determines the level of
. Twist this knob to adjust Channel 4's volume
and dial in the desired balance of levels with Channel 1, 2 and 3.
Because this volume control is located pre effects loop, it also determines the effects
send level for Channel 4.
The red LED to the right of the knob lights up to indicate
is on.
Middle
Middle-voiced
Middle
Middle-voiced
Channel 3 Lead
Lead Ch3
Channel 4 Lead
Lead Ch 4
This is the preamp voicing section's passive boosted midrange EQ for
and
. Use this special Mid control in alternating operation with
(19).
(button, 24) is activated.
This is the preamp voicing section's passive high-frequency EQ for
and
.
Channel 3 Lead
Channel 4 Lead
Middle
Middle-
voiced
Channel 3 Lead
Channel 4 Lead
22 Lead Volume-3 (
23 Lead Volume-4 (
10
