ON/OFF
ON/OFF
Tube Amplifier
W
RITE
M
IDI
C
HANNEL
S
WITCH
L
OOP
1
S
WITCH
L
OOP
2
S
WITCH
L
OOP
3
S
WITCH
L
OOP
4
S
WITCH
L
OOP
5
S
WITCH
L
OOP
6
MIDI SWITCHER
16
8
8
8
16
16
1. Use a dual footswitch such as the ENGL Z-4,
connecting it to the amp via a stereo cord equipped
with ¼" jack plugs. You can switch channels and Gain Boost via the dual footswitch connected to
port 20, Mid Boost and M.V.B. via the dual footswitch connected to port 19, and FX Loop Off/On and
Reverb Off/On via the dual footswitch connected to port 18.
2. Use a MIDI switcher such as the ENGL Z-11, c
onnecting it to the amp via three stereo cords
equipped with ¼" jack plugs. The buttons on the switcher can serve to control Clean/Lead, Gain Boost,
Mid Boost, M.V.B., the FX Loop, and Reverb.
You can also program all kinds of switching setups to the various MIDI program locations. Here's just
one example: You could configure MIDI Preset #1 so that the Clean channel, Gain Boost, and Reverb
are on, while Mid Boost, M.V.B., and the FX Loop are off. Then you could set MIDI Preset #2 up so
that Lead channel, Mid Boost, and M.V.B. are on, while Gain Boost, the FX Loop, and Reverb are off.
Whatever setups you decide to program, you can easily activate the desired configuration directly via
a MIDI board such as the ENGL Z-9, Z-12, or Z-15.
This type of control option is extremely versatile; we recommend it highly if you intend to use the amp
in conjunction with any MIDI system, including MIDI effects devices.
Stereo
1/4" jack
tip: refer to
*T
ring: refer to
*R
sleeve: Ground (Shield)
Use a stereo
plug only!
Stereo
1/4" plug
ring
*R
tip
*T
sleeve
Wiring of Principal Connectors: Footswitch (18, 19, 20)
Your options for controlling the GigMaster 30 amp remotely:
T e c h n i c a l s p e c i f i c a t i o n s a r e s u b j e c t t o c h a n g e w i t h o u t n o t i c e .
ENGL Gerätebau GmbH
Internet: www.engl-amps.com
Text, design, graphics and layout by
Horst Langer, ENGL Amp Designer
or
1.
2.
Speaker / cabinet options:
or ->
or ->
or ->
Footswitch jack (20):
*R:
A switch connected to this terminal controls
Gain Boost: off <--> on;
*T:
A switch connected to this terminal controls
Channel switching: Clean <--> Lead;
Footswitch jack (18):
*R:
A switch connected to this terminal controls
Reverb:
off <--> on;
*T:
A switch connected to this terminal controls
FX Loop:
off <--> on;
Footswitch jack (19):
*R:
A switch connected to this terminal controls
M.V.B. off <--> on (low / high level);
*T:
A switch connected to this terminal controls
Mid boost: off <--> on;
3 x
Footswitch
Tube
Guitar Amplifier
GigMaster 30
Combo: Type E300
Head: Type E305
Amp-Design by
Horst Langer
ENGL Amps
Made in Germany
CAUTION !
!
REPLACE FUSE
ONLY WITH SAME
TYPE AND RATING !
R
FX Off/On
Reverb
DO NOT OPEN !
RISK OF ELECTRIC SHOCK !
DO NOT EXPOSE THIS
EQUIPMENT TO
RAIN OR MOISTURE !
FX Loop
Send
Return
16 Ohms serial
1 x 16 Ohms
2 x 8 Ohms
Poweramp Output
8 Ohms
parallel
A
B
Important:
Connect
one 16 Ohms
cabinet to
output jack A!
8 Ohms
Combo:
internal speaker
Clean/Lead
Gain Boost
Mid Boost
M.V.B.
0 dB
Poweramp
Signal
Line
Output
