background image

Technical Data:

Rated power:              

approx. 50 watts at 8 or 16 ohms;                    

Tubes: 

                          

V1 (input-tube):

 

ECC 83 / 12AX7, FQ Grade;

                                           V2, V3:  ECC 83 / 12AX7 selected;
                                           V4:        ECC 83 / 12AX7, standard;
                                           V7, V8:  5881 (6L6GC) matched set.

Fuses:           

external:  

1,25 AM (medium) at 230 Volts;

                                           2,5 AM (medium) in the 100 and 120 Volts models.

                     

internal:

  

1,6 AT (slow) at 230 Volts;

                                           3,15AT (slow) in the 100 and 120 Volts models.                           

Important:         

          

Replace fuses only against same type and rating!

Dimensions:

                

Combo E320 approx. 52,5 x 45 x 25 cm, (20,7 W x 17,7 H x 9,8 T) 

                                           Head E325 approx. 52,5 x 25 x 25 cm, (20,7 W x 9,8 H x 9,8 T)  

Weight:

                         

Combo: approx. 22 kg (48,4 lbs); Head: approx. 14 kg (30,8 lbs);

Tube array:

The different options for controlling the Thunder 50 amp remotely:

1. Two-way footswitch (e.g. ENGL Z-4): 

Connect it to the amp (to jack 15) via a stereo ¼" cord. 

Functions: Clean/Lead, Crunch/Lead. With this solution, you can't activate the channels Clean, Crunch 
and Lead directly, i.e. this requires an intermediate switching operation.
2

. MIDI-Switcher (e.g. ENGL Z-11):

 Connect the unit to the amp via two stereo ¼" cords. The 

buttons on the Switcher control Clean/Lead and Crunch/Lead. If you program the diverse channels 
to different MIDI program locations, you can activate all three channels directly via a MIDI board 
(e.g. ENGL Z-12). This type of control option is extremely versatile, we recommend 
it highly if you intend to use the amp in conjunction with a MIDI system (e.g. MIDI effects devices).

WRITE

MIDI 

CHANNEL

SWITCH
 

LOOP 1

SWITCH
LOOP 2

SWITCH
LOOP 3

SWITCH
LOOP 4

SWITCH
LOOP 5

SWITCH
LOOP 6

MIDI SWITCHER

ON/OFF

ON/OFF

Tube Amp

lifier

or

1.

2.

F

OOTSWITCH

F.X. L

OOP

S

END

B

ALANCE

DRY EFFECT

SERIAL NUMBER:

WIRED FOR:

REPLACE FUSE

ONLY WITH SAME 

TYPE AND RATING !

DO NOT OPEN !

RISK OF ELECTRIC SHOCK !

DO NOT EXPOSE THIS EQUIPMENT

TO RAIN OR MOISTURE !

!

C

LEAN

 / L

EAD

C

RUNCH

 / L

EAD

VOLTAGE

FUSED

100-120 V

220-240 V

2,5 A

1,25 A

P

OWERAMP

 O

UTPUT

16 OHMS SERIAL

1 x 16 OHMS

(USE LEFT JACK!)

2 x 8 OHMS

8 OHMS

 

PARALLEL

1 x 8

 

OHMS

2 x 16 OHMS

COMBO: INTERNAL SPEAKER

R

ETURN

MADE IN

GERMANY

All-tube 

Guitar Amplifier

Thunder 50 Reverb 

TYPE E320

Thunder 50

TYPE E322

Thunder 50

HEAD: TYPE  E325

Amp-Design by

Horst Langer

R

230 VOLT

098320

V 5

V4

V 6

V3

V 2

V1

Reverb-Connector

only at type E320

Power

Transformer

Output 

Transformer

Summary of Contents for Thunder 50 Type E322







Reviews: