background image

 

IMPORTANT!

  READ AND FOLLOW 

ALL

 INSTALLATION AND MAINTENANCE INSTRUCTIONS, INCLUDING 

CLEANING THE UNIT AS SPECIFIED, AND REPLACING GASKETS ANNUALLY, AND PARTS AS NEEDED. 

ENGLAND’S STOVE WORKS IS NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY INCURRED DUE TO NEGLECT, OR DUE 

TO UNSAFE INSTALLATION OR USAGE OF THIS PRODUCT. CALL TECHNICAL SUPPORT WITH QUESTIONS. 

35

WARRANTY REGISTRATION for England’s Stove Works 

 

Purchased by (Name) ______________________________________________ 

 

Address _________________________________________________________ 

 

City ________________________  State __________  Zip _________________ 

 

Telephone _______________________________________________________ 

 

Email Address ___________________________________________________ 

 

DEALER INFORMATION 

 

Purchased From (Dealer) ___________________________________________ 

 

Address _________________________________________________________ 

 

City ________________________  State __________  Zip _________________ 

 

UNIT INFORMATION 

(Please be sure to refer to label on stove or sale receipt to complete this section) 

 

Model Number _______________________   

Purchase Date  ________________________ 

 
Purchase Price _______________________ 
 
Serial Number _______________________   

Mfg. Date ____________________________ 

 

How did you first hear about our product? (Please check one) 

 

___ Friend/Family 

 

___ Burn Trailer Demonstration 

 

___ Internet 

 

          Other:  ____________________________________________________ 

 

Where did you receive information about our product? (Please check one) 

 

___ Rec’d. info. via phone  ___ Dealer (Name of dealer):  ______________________ 

 

___ Internet 

   Other:  _________________________________________________ 

 

IMPORTANT NOTICE 

THIS REGISTRATION INFORMATION MUST BE ON FILE FOR THIS WARRANTY TO BE VALID. 

PLEASE MAIL THIS INFORMATION WITHIN THIRTY (30) DAYS FROM THE DATE OF PURCHASE.

 

 

Mail To: 

England’s Stove Works, Inc. 

Technical Support Department 

P.O. Box 206 

Monroe, VA 24574 

Or, Fax To: 

(434) 929-4810 – 24 hours a day 

Or, now available – Go online to complete your Warranty Registration! 

Visit 

www.englanderstoves.com

 if you prefer to register online. 

Summary of Contents for 10-CPM




































Reviews: