33
32
Flipperpanel (cont.):
Q. can i connect the Flipperpanel to a television or monitor?
A. Yes. The FlipperPanel includes an RCA cable that will allow it to con-
nect to a television. The FlipperPanel can also be connected to a PC
monitor through use of an adapter (not included). To connect the
FlipperPanel to the TV set you will need the RCA video cable. Plug one
end of the RCA cable into the yellow output jack on the back of the power
pack labeled “Video Out” and the other end into the yellow “Video Input”
jack on the front or the back of your TV. Then switch your TV to Video
Mode.
Q. is the lcD screen adjustable?
A. The LCD screen can be adjusted both vertically and horizontally by
gently rotating the frame up, down, left or right.
Q. can i adjust the height of the lcD screen?
A. Yes, by loosening the mounting bracket on the back of the LCD screen
and sliding the screen up or down to the desired location. However, we
don’t recommend tampering with this as the system is set at the ideal
height when shipped.
Q. can i adjust the lcD screen settings?
A. No, the settings have been preset and cannot be changed.
Flipper Stand:
Q. What is the advantage of using Flipper Stand?
A. When used with any television monitor, the Flipper Stand allows the
Flipper to be used as a desktop video magnifier. The stand has a table
that can be moved in any direction or be simply locked in place. This
enables the user to place text, writing implements, photos, or any hobby or
craft object and work with them under the Flipper camera. The object can
be magnified and viewed on the television monitor, depending on how the
Flipper is configured.
The Flipper Stand is a great advantage to students. The student can point
the camera down to work with schoolwork on the moving table and also
point outward or toward the blackboard and see the instructor.
Q. can i connect the Flipper Stand directly to my television?
A. No. You will need to connect the Flipper directly to the television as
normally required. The Flipper Stand has no video out capability.
Q. How does my Flipper work with the Flipper Stand?
A. The Flipper Stand is fitted with a “cradle” that sits above the moving
table. the cradle has the ability to rotate side-to-side. A small magnet that
is built into the Flipper allows the camera to adjust to work at the height
that the cradle holds the Flipper above the table. The Flipper sets into the
cradle allowing the camera to point down toward the table. If desired, the
camera can also be positioned to view an object located at a distance.
The side-to-side rotation of the cradle provides the ability to scan the area
being viewed with the camera.
C
ommon
Q
ueStionS
C
ommon
Q
ueStionS
