35
Troubleshooting
TROUBLESHOOTING
The
Merlin elite
will not power on
-Push the Power button on the
Merlin elite’s
Front Panel. Lights on the
Power button, Zoom Wheel and Mode button should illuminate indicating
the power is turned on.
-Make sure the power supply from the
Merlin elite
is securely connected to
a working outlet.
-Make sure the two parts of the power supply cord are securely connected.
-Make sure the power supply cord is completely plugged into the DC 19V
IN jack on the back of the viewing stand base.
-Check the power strip/surge protectors on/off switch and circuit breaker if
Merlin elite
is plugged into one.
The images seem to be out of focus
-Clean the protective glass covering the camera with the nonabrasive lens
cleaning cloth provided with your
Merlin elite
.
-Clean the monitor screen with a non-abrasive cloth sprayed with a glass
cleaning solution.
-Make sure the target material is steady on the tray. It might take a few
moments for the camera to achieve perfect focus after motion has
stopped. This is normal.
-Make sure the LED Lamps near the
Merlin elite
Camera are ON. Making
sure there is sufficient ambient lighting will assist in creating a better
image.
X-Y Table Does Not Move Smoothly
-Make sure the locking lever is positioned completely to the back.
X-Y Table Does Not Stay in Locked Position
-Make sure the locking lever is all the way to the front.