To Move Merlin ultra to Another Location
•
If you are repositioning Merlin ultra a short distance across a
desk or table, make sure you do not pull on any power cords or
connector cables.
•
Disconnect and secure all power and video cables and lock the
X-Y table before moving the unit.
•
Carry the unit only by the two recessed handles located on either
side of its base.
Do not carry it by the LCD monitor arm.
Caring for Merlin ultra
•
Always turn the power OFF for the Merlin ultra and the
monitor when the system is not in use.
•
Always turn the power OFF before cleaning Merlin ultra.
•
The protective glass covering the camera can be cleaned as
needed with the lens cloth provided within your Merlin ultra
’s
packaging.
Susceptibility to Interference:
There may be temporary degradation of the image when the Merlin
ultra is subjected to a strong radio frequency field, electro-static
discharge or transient electrical noise. An electro-static discharge
(caused by static electricity) may cause the screen to go black. If
this happens, unplug the AC Adaptor, wait 30 seconds, and plug the
cable back in.
Compliance Warnings:
•
Electromagnetic compatibility: The use of accessories and cables
other than those specified by Enhanced Vision may result in
increased emissions or decreased immunity of the Merlin ultra.
•
Placement of equipment: The Merlin ultra should not be
used adjacent to or stacked with other equipment.
8
Safety and Care