13
12
C
hanGinG
ViewinG
modeS
t
urninG
on
m
erlin
VGa
Merlin VGA power Button
The Power button on your Merlin VGA is located on the far right
of the control panel (item #1 above).
• Press the Power button. Notice the green light will illuminate on the
Control Panel, indicating that the power is "ON" (item #2 above).
• Once properly connected as described on the previous page, an
image should appear on your VGA monitor within a few seconds.
If the green power indicator does not illuminate or if an image
does not appear on your LCD monitor, please check the power
supply connections (review steps 2-4 on page 10 for details).
note: if your Merlin VGA is plugged into a power strip or
surge protector (recommended), make sure its power switch
is turned on before attempting to turn on Merlin VGA. if the
power strip/surge protector comes with a circuit breaker,
make sure the circuit breaker has been reset before
attempting to turn on Merlin VGA.
#2
#1
You can choose a viewing option by pressing the MODE button on
the control panel. Each press will cycle through all 7 viewing
options.
The available viewing options are:
• Full Color Image
• Black and White Image
• Enhanced Positive Image
• Enhanced Negative Image
• Color Select 1
• Color Select 2
• Color Select 3
Full color image
This mode is used most often because it gives you a true color
representation of the image that is being magnified. When Merlin
VGA is first turned on, it will display the image in full color.
Black and White image
Based on your preference, you can choose the black-and-white
mode.
crisp, clear
text images!
crisp, clear
text images!
Enhanced Positive
Enhanced Negative
tURninG on MeRlin VGA
chAnGinG VieWinG MoDeS
Summary of Contents for Merlin VGA
Page 1: ...VGA Users Manual ...
Page 19: ...37 36 Notes Notes Notes ...