11
Using the Pebble
Turning the Power On/Off
Use the following procedure to turn the power of
your Pebble On or Off:
Adjusting the Image Size
Use the following procedure to adjust the displayed
magnification (size) of the LCD image.
1) Find the green, recessed
POWER button located on the top
side edge of your Pebble.
(See Figure 1)
2) Press and hold the POWER
button to turn the Pebble on.
Shortly, an image should appear
on the LCD display. To turn off
the Pebble, press and hold the
POWER button again
(Figure 2).
Note: A short, confirmation tone (“beep”) will be
heard when the unit is powered On or Off.
1) Find the SIZE button located on
the lower right face of your Pebble
(See Figure 3).
2) Press the SIZE button to
change the magnification size on
the LCD. Pressing this button will
continuously cycle through all 3
magnification sizes
(See Figure 4).
Figure 3
Figure 1
Figure 4
Figure 2
