enistic
Energy Manager Starter Kit
Order code: EN-SSK
+44 (0)844 875 1600 | www.enistic.com
4.
Installation Instructions
Features of the Smart Energy Controller Lite (SECL)
Function
Description
Power Supply
Connect the power supply (included in kit) here.
Network connected
LED
This LED will be illuminated if the network cable to
your Intranet / Router is connected.
Network Activity LED
This LED flashes when there is network activity.
Note that this flashes with any network activity
and not just when the SECL communicates with the
Energy Manager.
Router / Intranet
connection
Plug your SECL into your broadband router,
Ethernet router or Intranet connection via the
supplied network cable.
Reset Switch
To perform a factory reset, press and hold this
button for 10 seconds then release the button.
Switch the SECL off and on for the reset to take
effect.
Online Server LED
This LED flashes every time the SECL successfully
communicates with the Energy Manager Online
website. If you have disabled access to the online
system, this LED will not flash.
